Ignition key extraction from 23 & Key is available in Chicagoland wherever your vehicle is stuck. If a key snapped in the ignition or will not come out of it, we come to the car, remove the key without damaging the column, and get you a working key to drive home with.
01Broken versus stuck
A broken key leaves a fragment in the cylinder; a stuck key is whole but will not release. Stuck keys often come from a shifter not fully in park, a steering lock under tension, or a dead battery on cars that need power to release the key. We check the simple causes first, then move on to ignition key extraction tools if the key truly will not come free.
02Protecting the ignition
Forcing a key out with pliers can bend the wafers inside the ignition and turn a small job into a cylinder replacement. We use extractors made for automotive locks and support the steering column as we work. Once the key is out, we test the ignition through every position before cutting a replacement key.
03Cutting a new key
For older vehicles, we can cut a new key from the broken pieces. For newer cars with transponder chips, we cut and program a key that the immobilizer accepts. Drivers in Tinley Park, Matteson and Chicago Heights have been able to drive away the same visit instead of waiting for a tow and a dealer appointment.
04If the ignition itself is worn
Sometimes the ignition key extraction reveals a worn cylinder that will keep chewing up keys. In that case we recommend repair or replacement and quote it before doing anything. Vehicles in Hodgkins and Olympia Fields with high mileage often fall into this category. Have your registration and ID ready so we can confirm ownership.
We are available 24/7 with a flat rate quoted first, and every technician is licensed, bonded and insured.